Rear Belted Seat For Three

Rear Belted Seat For Three

With only a few minor changes in the Tiree, widening the rear seat from two passengers to three is a straight forward option – meaning you can carry five people in seats that are all safety tested to full Type Approval standards (and also give yourself a wider bed!).

The seat width would increase from our standard 120cm (4ft) in the Tiree to 129cm (4ft 3) and give you a double bed that is still 186cm (6ft 1) long –  with the other option of also still increasing the bed length to 2 metres (6ft 6).

Increasing the width of your rear Tiree seat does have a small impact upon the furniture units alongside the driver’s side of the conversion. The wider seat does mean a slightly narrower counter towards the rear of the campervan, so it is only possible to fit a smaller sink with a hardwood top and tap located on the counter top, not the smoke glass lid sink with integrated tap that is normally found in our Tiree.

You will also have a little less width to the side lower cupboard storage but more storage under the rear seat.

All our rear seats, including the fixation kits we have designed to install them, have been completely safety tested within an actual T6 vehicle to full Type Approval standards. Jerba Campervans is one of very few UK camper conversion companies to, with the support of Volkswagen, have achieved National Small Series Type Approval for its VW T6 campervans – this is the highest level of vehicle safety testing. To see the actual tests we undertook and understand more about the Type Approval process just click here.

Sign up to our newsletter to receive tips, tutorials and much more